Re: 請問CCS COMPILER IDE 可以使用ICD2 除錯嗎
|
||||
---|---|---|---|---|
新會員
|
熱心公益先生您好:
請問要怎樣在MPLAB裡編輯CCS??? 可以將經驗分享給後學們嗎???? 謝謝了
發表於: 2005/6/22 22:13
|
|||
|
Re: 請問CCS COMPILER IDE 可以使用ICD2 除錯嗎
|
||||
---|---|---|---|---|
資深會員
|
CCS 在MPLAB裡面編輯並下載至ICD2
==>7.0不能使用 我灌7.11就可以使用了 超讚的 但是我不知道語法 不會書寫?
發表於: 2005/6/21 13:22
|
|||
==== ^^ ^^ ====
|
||||
|
Re: 請問CCS COMPILER IDE 可以使用ICD2 除錯嗎
|
||||
---|---|---|---|---|
資深會員
|
>> 是不是不ㄧ定要在CCS COMPILER IDE 編輯呢?
No >> 而ccs在MPLAB編輯下使用PIC16,PIC18是不是都可以呢? Yes >>請問一下CCS 可以在MPLAB裡面編輯並下載至ICD2執行模擬嗎? Yes and No. CCS 在MPLAB裡面編輯並下載至ICD2,應該是只能執行 ASM 模擬,不能執行 C-level 模擬。 我沒用 MPLAB,不敢保證啦 還是去 CCS 討論區發問吧 http://www.ccsinfo.com/forum/
發表於: 2005/6/20 18:32
|
|||
|
Re: 請問CCS COMPILER IDE 可以使用ICD2 除錯嗎
|
||||
---|---|---|---|---|
資深會員
|
請問一下CCS 可以在MPLAB裡面編輯並下載至ICD2執行模擬嗎?
是不是不ㄧ定要在CCS COMPILER IDE 編輯呢? 而ccs在MPLAB編輯下使用PIC16,PIC18是不是都可以呢?
發表於: 2005/6/20 11:05
|
|||
==== ^^ ^^ ====
|
||||
|
Re: 請問CCS COMPILER IDE 可以使用ICD2 除錯嗎
|
||||
---|---|---|---|---|
資深會員
|
不行的
CCS provides a high level debugger for the Microchip PIC® line of microcontrollers. This debugger is included with PCW, CCS's C Compiler with Windows IDE, and requires an ICD unit (Microchip MPLAB®-ICD1, CCS ICD-S40 or CCS ICD-U40) connected to a flash PIC series microcrontroller that is capable of debugging (such as the PIC16F87x or PIC18Fxx2). Future support will include other emulator and debugging hardware and the dsPIC® line of microcontrollers. 你可以用 CCS 做的 ICD-U (美金 75) 或是用舊的 ICD-1 加上 CCS 的韌體讓 ICD-1 可以玩 18F If you own an MPLAB® ICD1 you can load it with CCS-ICD firmware to get PIC18 debugging and ICSP functionality, but this functionality is only provided through CCS's software and not Microchip's software. However this is a great way to upgrade your existing ICD1's for use with PIC18s. http://www.ccsinfo.com/icds.shtml
發表於: 2005/6/19 17:30
|
|||
|
請問CCS COMPILER IDE 可以使用ICD2 除錯嗎
|
||||
---|---|---|---|---|
新會員
|
請問CCS COMPILER IDE 可以使用ICD2 除錯嗎
謝謝各位前輩的回答....
發表於: 2005/6/19 12:11
|
|||
|