Re: 請問有關MPLINK的問題?
|
||||
---|---|---|---|---|
資深會員
|
你是不是有把lkr檔加進來??若是請拿掉....
我想你的CODE應該是用絕對位址定址。所以根本不需要lkr檔。 (ex:16F877就是用16f877.lkr) 會用到MPLINK就是用相對定址的方式寫PIC的程式。或是你用C16(18)寫的程式才會用到.... 這樣lkr檔才會用到。 右邊 "教材與講義" 裡面有相關資料可以參考.....
發表於: 2004/8/29 20:09
|
|||
|
Re: 請問有關MPLINK的問題?
|
||||
---|---|---|---|---|
新會員
|
我查了一下HELP~~
裡面對MPLINK ERROR的形容~~ 有人知道是什麼意思嗎? Section 'secName' can not fit the absolute section. Section 'secName' start=0xHHHH, length=0xHHHH. A section which has not been assigned to a memory in the linker command file can not be allocated. Use the -m <mapfile> switch to generate an error map file. The error map will show the sections which were allocated prior to the error. More memory must be made available by adding a CODEPAGE, SHAREBANK, or DATABANK directive, or by removing the PROTECTED attribute, or the number of input sections must be reduced
發表於: 2004/8/29 14:35
|
|||
|
請問有關MPLINK的問題?
|
||||
---|---|---|---|---|
新會員
|
請問有關MPLINK的問題?
不知道為什麼~~一直都無沒組譯成功,HEX檔出不來~~ 我問過站上前輩,程式應該沒問題, MPLAB IDE也重灌過從V6.60--->V6.61 但問題還是一樣,出現下面錯誤訊息~~ 請問站上高手們~~這到底是那裡出了錯啊? 一直卡在MPLINK過不去~~ 請各位前輩不吝指教~~謝謝 MPLINK 3.80.02, Linker Copyright (c) 2004 Microchip Technology Inc. Error - section '.org_0' can not fit the absolute section. Section '.org_0' start=0x00000000, length=0x00000054 Errors : 1 BUILD FAILED: Sat Aug 28 23:48:14 2004
發表於: 2004/8/29 14:34
|
|||
|