:::
Browsing this Thread:
1 Anonymous Users
|
Re: 為何用AL-11燒錄PIC12F675.....在Blanking 時會Error
|
||||
|---|---|---|---|---|
|
新會員
 
|
報告版主大大還是會有BLANK CHECK ERROR的問題,不過程式已經可以WORK了,只差如何讀取INPUT PORT部分
發表於: 2004/7/15 21:52
|
|||
|
||||
|
Re: 為何用AL-11燒錄PIC12F675.....在Blanking 時會Error
|
||||
|---|---|---|---|---|
|
版主
 
|
__CONFIG _CP_OFF & _CPD_OFF & _BODEN_ON & _MCLRE_OFF & _WDT_OFF & _PWRTE_ON & _INTRC_OSC_NOCLKOUT
請參考
發表於: 2004/7/15 15:41
|
|||
|
||||
|
為何用AL-11燒錄PIC12F675.....在Blanking 時會Error
|
||||
|---|---|---|---|---|
|
新會員
|
我用AL-11燒錄時,會發生Blank Check Error at 2007h,
查了一下位置是放CONFIG的地方....... 然後我就選擇在燒錄時不要做Blank Check,燒錄就一切正常,而比對內容無誤....... 可是跑出來的結果不對(與我用MPLAB SIM跑出來的答案不同) PS:也許是我初始化有問題,誰有把6個腳位都初始成GPIO的範例程式?
發表於: 2004/7/15 14:56
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
