到 Microchip 上 workshop 的課，有人指導比較快，課程內容在右邊的 教育訓練 裡就有。

板子的作者跟我說，他根本沒畫線路圖，直接就layout了，所以沒有線路圖。

真是有夠厲害。

使用手冊第十三頁已有說明如何使用這個燒錄座的說明。
網站上的是舊版的會在update 新版的使用說明上去。

特惠工具購買辦法已於新聞區公佈。

REV.2基本上只比REV.1 多出燒錄電路。

目前沒有電路資料。燒錄電路很簡單，看看應該就知道了。

你好：

能否開放 EVM:APP001 『REV.2』的電路資料？

你們網頁上只有舊版的 『REV.1』。

我買的DEMO BOARD 有附書面資料，不過字太小，我想要自己再印一份，能否提供載


上星期五高雄的研討會，我記得你們有提到，一個星期內還能夠以當時的價格來購買

ICD2 + DEMOBOARD，我需要再多買一套，請問我要找誰連絡？

謝謝大大們...
我所找到的相關程式幾乎都是".ASM"而非C.讓我很苦惱
我大概都知道電路之間的運作,但就是不知如何跨出去,
可能是對C語言太陌生了有哪個大大能幫幫忙....

您好:
小弟在讀pic16f8x data sheet時有點疑問,請問為何ID原廠只建議
只用4BIT,謝謝.原文如下

2.2 ID Locations
A user may store identification information (ID) in four
ID locations, mapped in addresses 2000h through
2003h. It is recommended that the user use only the
four Least Significant bits of each ID location. The ID
locations read out in an unscrambled fashion after code
protection is enabled. It is recommended that ID location
is written as “11 1111 1000 bbbb”, where
“bbbb” is ID information.

請教各位大大，有用hi-tech c語法編譯的rfpic12f675f傳送端和接收端的範例程式嗎?

Thanks very much.....

Baseline Flash Microcontroller Programmer (BFMP)

PG164101


Summary

The Baseline Flash Microcontroller Programmer (BFMP) is a simple and easy-to-use in-circuit serial programmer intended to be used with any of Microchip’s new baseline Flash PIC® microcontrollers. Specifically the PIC10F200/202/204/206, PIC12F508/509, PIC16F505 and PIC16F54/57/59. The BFMP provides a 6-pin linear ICSP™ header for standard ICSP support, as well as stand-alone programming support for the PIC10F family when paired with the PIC10F2XX Programmer Adapter, providing the least expensive method of programming. The BFMP utilizes USB and does not require an external power supply. The included Graphical User Interface (GUI) allows you to read, write and verify the microcontroller to be programmed.

Features

Low-cost, easy to use “Getting Started” programmer for baseline PIC microcontrollers
In-Circuit Serial Programming™ capability
No external power supply required
Graphical User Interface let’s you read, write and verify device to be programmed