Re: 關於I/O

作者 Ryang 於 2017年09月04日 09:53:29
參考一下: C:\Program Files (x86)\Microchip\xc8\v1.43\docs\pic_chipinfo.html 的檔案內的說明 (PIC16F1828)

IESO = Internal/External Switchover
ON Internal/External Switchover mode is enabled
OFF Internal/External Switchover mode is disabled

FCMEN = Fail-Safe Clock Monitor Enable
ON Fail-Safe Clock Monitor is enabled
OFF Fail-Safe Clock Monitor is disabled

STVREN = Stack Overflow/Underflow Reset Enable
ON Stack Overflow or Underflow will cause a Reset
OFF Stack Overflow or Underflow will not cause a Reset

BORV = Brown-out Reset Voltage Selection
LO Brown-out Reset Voltage (Vbor), low trip point selected. (aliases: _BORV_19)
HI Brown-out Reset Voltage (Vbor), high trip point selected.

LVP = Low-Voltage Programming Enable
ON Low-voltage programming enabled
OFF High-voltage on MCLR/VPP must be used for programming

來自: http://www.microchip.com.tw/newbb/viewtopic.php?forum=1&topic_id=19627&post_id=76625